Idaho House Technology Part 1

The new house is full of technology that I have not seen before in home construction. I will share the new tech as it is added to the house. Standard batting pink insulation? Not if you want an R value of 19 in a 2 x 6 wall. Check out the:

Blow-In-Blanket Insulation Process (from bobvila.com)

Bob is joined by Mikde Hobson of Westchester Insulation as the crew prepares one of the Mashpee houses for insulation installation. Hobson explains that this is a patented insulation system that uses special fabric stapled and drawn tight across any cavity that needs to be insulated. The crew works with pneumatic staplers to get the fabric in place across all the walls and the joists of the cathedral ceiling. The fabric is not intended as a moisture barrier of any kind and is just there to hold the insulation in place and prevent it from settling. Hobson shows Bob the white fiberglass that will be blown into the cavities. It is white because it is a virgin product, completely free of treatments, binders, or chemicals. Certainteed and Johns Manville both produce fiberglass insulation that is suitable for the Blow-In-Blanket installation. Once all cavities have been enclosed, the insulation contractor cuts a slit in the fabric and inserts a hose through which the fiberglass is blown. The cavity is filled to a density of two pounds per cubic foot which is visible to the eye by a slight bulge in the fabric. At this density, an R-value of 15 is achieved in two-by-four cavities like walls. In attics and ceiling cavities that are two-by-six, an R-value of 38 can be achieved. This insulation is inert and will not support moisture, mold, animals, or insects. It also serves as a sound insulator and can be blown in around drain lines, in interior partitions, and around tubs and showers. Blo-In-Blanket insulation is suitable for new construction or retrofit applications where it is blown in through the sheathing from the outside or through interior drywall to fill wall cavities. Blow-In-Blanket insulation costs about 50 to 60 percent more to install than traditional batt insulation, but offers such energy efficiency that it pays for itself within two to four years.